In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and particularly if your adult boxer dog dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are level and make certain it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you’ll have to do some sanding to make certain it’s secure on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.